Diagram 150/40 (Tracks 533-546)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G40 - Camshaft Position (CMP) Sensor Locations

G336 - Intake Manifold Runner Position Sensor

J519 - Vehicle Electrical System Control Module Component Locations Vehicle Electrical System Control Module -J519-

J623 - Engine Control Module (ECM) Locations

N75 - Wastegate Bypass Regulator Valve

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve Locations

N112 - Secondary Air Injection (AIR) Solenoid Valve Locations

N205 - Camshaft Adjustment Valve 1 Locations

N249 - Turbocharger Recirculating Valve

N274 - Wastegate Bypass Regulator Valve 2

T3q - 3-Pin Connector

T60 - 60-Pin Connector

(D141) - Connection (5V) (in engine wiring harness)


- Location: In wiring circuit between main harness and J623 - Engine Control Module (ECM)

(D181) - Connection 2 (87a) (in engine wiring harness)


- Location: in vehicle 2,5 L: In main wiring harness between wiring circuits for N83 - Cylinder 5 Fuel Injector and G71- Manifold Absolute Pressure (MAP) Sensor


- Location: in vehicle 2,0 L: In main wiring harness between wiring circuits for 15 - Ground Connection (on cylinder head) and T14a connection in engine compartment wiring harness

Previous Diagram 150/39 (Tracks 519-532)

Next Diagram 150/41 (Tracks 547-560)