Headlamps with Gas Discharge Lamps, Adjusting

Headlamps with Gas Discharge Lamps, Adjusting

Basic Setting, Performing

- Connect the Vehicle Diagnosis Tester.






- Switch the ignition on.

- Press on "Guided Functions".

- Perform vehicle identification.

- Select vehicle system "automatic head lamp range control/cornering lamp".

- Select "perform basic setting" and confirm.

- Follow the instructions on the Vehicle Diagnosis Tester.

- Check the headlamp position and adjust if necessary.

Adjust the right headlamp:

Adjustment screws for left headlamp are arranged symmetrically.






• Adjusting screw (inner hexagon) for side adjustment (sealed for the NAR market) of the Bright-Dark Limit - 1 -

• Adjustment screw (inner hexagon) for height adjustment of bright/dark boundary - 2 -

- First turn adjustment screw - 2 - to adjust height of bright/dark boundary.

- Then the side adjustment must be checked and correct with adjustment screw - 1 - if necessary.