Shift Interlock: Service and Repair

Selector Lever Emergency Release

Do not remove knob.

- Unclip selector cover and hold to side.

- Depress brake pedal or set parking brake.

- Press yellow plastic wedge from right to left.





Lever can now be moved from position P.

Knob, Removing and Installing

It is possible with all knobs that the button is pressed into the knob. Never install a knob with the button pressed in.

- Before removal, pull button out past its pressure point.





- Secure button against being pressed in with a cable tie or wire.

- Unclip cover.

- Release knob.





- After installation, engage knob again and press down plastic part below knob again.

- Remove transport guard of a new knob after releasing knob.





- Pull connector from cover.

- Pull off knob upwards.

- After installation, engage knob again and press down plastic part below knob again.