Right Seat Trim Panel with Power Lumbar Adjustment

Right Seat Trim Panel with Power Lumbar Adjustment

Removal

- Press metal tab of securing clip - 2 - inward using a small screwdriver and pull off handle - 3 - from adjustment lever - 1 -.

• For clarity, securing clip is depicted as removed in the illustration.

- Remove the clip - 2 - from adjusting lever - 1 -.

- Using (3399), reach behind a locking mechanism of backrest adjusting wheel - 8 -.

- Pry (3399) outward - arrow A - and remove backrest adjusting wheel from seat.

- Press clamping pin - 7 - and remove the clip - 6 -.

- Pull the trim panel - 5 - toward the front of the vehicle and out of the mounts inside the seat frame and disconnect the wire from the switch - 4 -.





Installation

- To install, perform the steps used for removal in reverse order.