Diagram 160/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Turn Signal Switch, Headlamp Dimmer/Flasher Switch, Vehicle Electrical System Control Module, Steering Column Electronic Systems Control Module, Data Bus On Board Diagnostic Interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E2 - Turn Signal Switch

E4 - Headlamp Dimmer/Flasher Switch

J104 - ABS Control Module ABS Control Module (models with ABS / EDL/ASR) -J104-

J285 - Instrument Cluster Control Module Component Locations Locations

J519 - Vehicle Electrical System Control Module Component Locations Vehicle Electrical System Control Module -J519-

J527 - Steering Column Electronic Systems Control Module Component Locations Locations

J533 - Data Bus On Board Diagnostic Interface Component Locations Locations

T20 - 20-Pin Connector

T20d - 20-Pin Connector

T36 - 36-Pin Connector

T47 - 47-Pin Connector

(367) - Ground Connection 2 (in main wiring harness)

(602) - Ground Connection (on upper steering column)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

Previous Diagram 160/6 (Tracks 57-70)

Next Diagram 160/8 (Tracks 85-98)