Diagram 60/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver's Seat Lumbar Support Adjustment Switch, Driver's Seat Adjustment Control Head, Memory Seat/Steering Column Adjustment Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E176 - Driver's Seat Lumbar Support Adjustment Switch

E470 - Driver's Seat Adjustment Control Head

J131 - Driver's Heated Seat Control Module Component Locations Heated Driver Seat Control Module -J131-

J136 - Memory Seat/Steering Column Adjustment Control Module

J519 - Vehicle Electrical System Control Module Component Locations Vehicle Electrical System Control Module -J519-

J527 - Steering Column Electronic Systems Control Module Component Locations Locations

J533 - Data Bus On Board Diagnostic Interface Component Locations Locations

T4at - 4-Pin Connector

T6ah - 6-Pin Connector

T6g - 6-Pin Connector

T10a - 10-Pin Connector

T10g - 10-Pin Connector

T20 - 20-Pin Connector

T20d - 20-Pin Connector

T26b - 26-Pin Connector

(77) - Ground Connection (on left lower B-pillar)

(95) - Ground Connection 1 (in power seat wiring harness)

(96) - Ground Connection 1 (in heated seats wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

(M42) - Connection 2 (in driver's seat wiring harness)

Previous Diagram 60/2 (Tracks 1-14)

Next Diagram 60/4 (Tracks 29-42)