Diagram 65/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake Light Switch Brake Light and Park Brake Light Switch

F47 - Brake Pedal Switch Brake Light and Park Brake Light Switch

G397 - Rain/Light Recognition Sensor Locations

G476 - Clutch Position Sensor

J104 - ABS Control Module ABS Control Module (models with ABS / EDL/ASR) -J104-

J519 - Vehicle Electrical System Control Module Component Locations Vehicle Electrical System Control Module -J519-

J603 - Vehicle Position Recognition Control Module

SB22 - Fuse 22 (on fuse panel B)

SB39 - Fuse 39 (on fuse panel B)

SC2 - Fuse 2 (on fuse panel C) Locations

SC17 - Fuse 17 (on fuse panel C) Locations

T3ae - 3-Pin Connector

T4y - 4-Pin Connector

T5m - 5-Pin Connector

T8h - 8-Pin Connector

T26a - 26-Pin Connector

T40 - 40-Pin Connector

T47 - 40-Pin Connector

(A193) - Connection (87a) (in instrument panel wiring harness) Location: In main wiring harness between wiring circuits for G476 - Clutch Position Sensor and power supply (SB)

(A198) - Connection 6 (30a) (in instrument panel wiring harness) Location: In wiring circuit between main wiring harness and T8d connection of roof

(A199) - Plus Connection 4 (15a)(in instrument panel wiring harness) Location:In main wiring harness between wiring circuits for J285 - Instrument Cluster Control Module and J533 - Data Bus On Board Diagnostic Interface

(*) - Engine code BPY only

(**) - through November 2005

(---) - from December 2005

Previous Diagram 65/11 (Tracks 127-140)

Next Diagram 65/13 (Tracks 155-168)