Diagram 130/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Coolant Temperature (ECT) Sensor, Engine Control Module (ECM), Throttle Valve Control Module, Ignition Coil 5 with Power Output Stage, Spark Plugs





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G69 - Throttle Position (TP) Sensor 2.5L BGP, BGQ, CBTA and CBUA

G83 - Engine Coolant Temperature (ECT) Sensor (on radiator) Locations

G186 - Throttle Drive (for Electronic Power Control (EPC)) Locations

G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC)) Locations

J338 - Throttle Valve Control Module Locations

J519 - Vehicle Electrical System Control Module Component Locations Vehicle Electrical System Control Module -J519-

J623 - Engine Control Module (ECM) * Locations

N323 - Ignition Coil 5 with Power Output Stage Locations

P - Spark Plug Connectors

Q - Spark Plugs

T4aj - 4-Pin Connector

T6x - 6-Pin Connector

T121 - 121-Pin Connector

(85) - Ground Connection 1, in engine compartment wiring harness

(281) - Ground Connection 1, in wiring harness engine pre-wiring

(D20) - Connection (87a) (in right front wiring harness)

(D108) - Connection 6 (in engine compartment wiring harness)

(D109) - Connection 7 (in engine compartment wiring harness)

* - Referenced in Self-Diagnosis and Guided Fault Finding programs as J220

Previous Diagram 130/9 (Tracks 99-112)

Next Diagram 130/11 (Tracks 127-140)