Diagram 130/12 (Tracks 141-154)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Speed (RPM) Sensor, Manifold Absolute Pressure (MAP) Sensor, Engine Control Module (ECM) , Evaporative Emission (EVAP) Canister Purge Regulator Valve, Camshaft Adjustment Valve 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine Speed (RPM) Sensor Locations

G71 - Manifold Absolute Pressure (MAP) Sensor 2.5L BGP, BGQ, CBTA and CBUA

J519 - Vehicle Electrical System Control Module Component Locations Vehicle Electrical System Control Module -J519-

J623 - Engine Control Module (ECM)* Locations

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve Locations

N205 - Camshaft Adjustment Valve 1 Locations

T4x - 4-Pin Connector

T14a - 14-Pin Connector, near battery

T121 - 121-Pin Connector

(A99) - Connection 1 (87) (in instrument panel wiring harness)

(D101) - Connection 1, in engine compartment wiring harness

(D103) - Connection 3, in engine compartment wiring harness

(D181) - Connection 2 (87a) (in engine wiring harness)

* - Referenced in Self-Diagnosis and Guided Fault Finding programs as J220

*** - Coolant fan connection

Previous Diagram 130/11 (Tracks 127-140)

Next Diagram 130/13 (Tracks 155-168)