Fender Connecting Plate
Fender Connecting Plate
• Fender connecting plate already cut out.
• The fender connecting plate has an upper and lower part
Cutting Location
- Separate original joint.
- Remove excess material.
Welding In
- Headlight mount => [ Headlamp Mount ] .
- Install new part and check gaps with attaching parts.
- Weld in new part using RP spot weld seam.
The upper fender connector is attached with 3 M5 screws - 1 - to the lower fender connector.
- Weld new part in, RP spot weld seam.