Inner and Outer Roof Crossmember, Convertible

Roof Trim

Inner and Outer Roof Crossmember, Convertible

Removal

- Remove the A-pillar trim. Refer to => [ Upper A-pillar Trim Assembly Overview ] .

- Remove the sun visor.

- Remove the interior rearview mirror.

- Remove the vanity mirror lamps.

- Remove bolts - 7 -.

- Loosen front trim - 5 - and disconnect at the rear.

- Remove crossmember seal - 4 -. Refer to => [ Roof Crossmember Seal and Retaining Track Assembly Overview, Convertible ] Roof Trim Overview.

- Detach the door seal in the area of the A-pillar - arrow -.

- Unhook trim - 1 - and push in an upward direction.

Installation

Installation is the reverse of removal.

• Prior to installing trims - 1 - and - 5 -, check the condition and seating of clips - 2 - and - 6 -. Replace the clips if necessary.