Diagram 652/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Brake Fluid Level Warning Switch, Left Front Brake Pad Wear Sensor, Instrument Cluster Control Module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F34 - Brake Fluid Level Warning Switch

G34 - Left Front Brake Pad Wear Sensor ABS - Electrical and Electronic Component Locations - EDL/ASR/ESP

H2 - High Tone Horn Locations

J285 - Instrument Cluster Control Module

J533 - Data Bus On Board Diagnostic Interface

K32 - Brake Pad Wear Indicator Lamp

K47 - ABS Warning Lamp

K118 - Brake System Warning Lamp

K155 - ASR/ESP Control Lamp

M5 - Left Front Turn Signal Lamp

T32 - 32-Pin Connector, blue, on display unit in instrument cluster

T32a - 32-Pin Connector, green, on display unit in instrument cluster

(119) - Ground Connection 1 (in headlamp wiring harness)

(120) - Ground Connection 2 (in headlamp wiring harness)

(642) - Ground Connection (on electronic fan control)

(A76) - K-Diagnosis Wire Connection (in instrument panel wiring harness)

(D55) - Left Brake Wear Indicator Connection (in engine compartment wiring harness

(D56) - Left Brake Wear Indicator Connection (in engine compartment wiring harness

1) - Through June 2007

2) - From July 2007

Previous Diagram 652/5 (Tracks 43-56)