Engine Rear Assembly Overview

Engine Rear Assembly Overview





1. Cylinder block
2. Locking bolt, 30 Nm
^ With rolled up seal
^ Bore in cylinder block for securing crankshaft with locking pin T40069
3. 25 Nm
4. Brace
^ For exhaust manifold
5. Knock Sensor (KS) 1 G61
^ Note installation position: Cable connection points downward vertically.
6. 20 Nm
^ Tightening torque affects function of Knock Sensor (KS).
7. 10 Nm
8. Trim strip
9. Bayonet connection
10. Cable clamp
^ Clamped on cover plate
11. Knock Sensor (KS) 2 G66
^ Note installation position: Cable connection points 45 degree toward right on outside
12. Cable bracket
^ Bolted to Secondary Air Injection (AIR) valve
13. Connector
^ Green for Knock Sensor (KS) 1 G61
^ Contacts gold plated
14. Connector
^ Gray for Knock Sensor (KS) 2 G66
^ Contacts gold plated
15. 10 Nm





Installation position of harness connectors for knock sensors
1. Green for Knock Sensor (KS) 1 G61
2. Gray for Knock Sensor (KS) 2 G66