Ride Height

Ride Height Specifications:
Vehicle transverse inclination "Zero position"





If the measured values exceed tolerances, the cause may be an incorrect vehicle attitude.
Example: vehicles with an automatic transmission can lean to one side slightly.
This is due to the installation position of the assemblies and their associated weight transfer and is normal.





- If vehicle leans to one side, measure dimension "a" on left and righthand sides.
- Correct differences if necessary.
^ On front axle, compensate by adding weight to top of relevant strut tower.
^ On rear axle, compensate by adding weight to relevant side of luggage compartment.
^ Sand filled bags weighting approx. 10 kg (22 lbs.) are suitable for this.