Installation Unit

Sunroof

Installation Unit

Removing

- Removing automatic rotary switch for sunroof, refer to=> [ Sunroof Automatic Rotary Switch ]. Sunroof Automatic Rotary Switch

- Remove molded headliner.





- Disconnect water drain hoses from installation unit - 1 - - arrows -.

- Remove bolts - 2 - and - 4 - (with sleeves) and remove installation unit from the vehicle with a second technician.

Installing





- Insert installation unit - 1 -, align according to bolt bores and insert bolts - 2 - and - 4 - (with sleeves).

- Check and establish if necessary correct routing of wires and harness connectors for electrical components at roof.

- Secure (8 Nm) installation unit - 1 - of drive motor for sunroof - 3 - beginning at left and right toward rear.

- Install water drain hoses - arrows -.

- Connect harness connector for drive motor - 3 -.