Diagram 652/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Steering Angle Sensor, ABS Control Module, ABS Hydraulic Pump





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

G85 - Steering Angle Sensor ABS - Electrical and Electronic Component Locations - EDL/ASR/ESP

J104 - ABS Control Module ABS - Electrical and Electronic Component Locations - EDL/ASR

J220 - Motronic Engine Control Module (ECM) Locations

J248 - Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) Locations

N133 - Right Rear ABS Inlet Valve

N134 - Left Rear ABS Inlet Valve

N135 - Right Rear ABS Outlet Valve

N136 - Left Rear ABS Outlet Valve

S15 - Fuses (on fuse/relay panel) Overview of Fuses, From June 2002

S178 - Fuse 6 (30) on battery fuse holder

S179 - Fuse 7 (30) on battery fuse holder

T3 - 3-Pin Connector

T6k - 6-Pin Connector

T47a - 47-Pin Connector, on ABS control module

T94 - 94-Pin Connector

T121 - 121-Pin Connector

V64 - ABS Hydraulic Pump ABS - Electrical and Electronic Component Locations - EDL/ASR

(501) - Threaded Connection 2, terminal 30 (on relay panel)

(A121) - High-Bus Connection (in instrument panel wiring harness)

(A122) - Low-Bus Connection (in instrument panel wiring harness)

(A167) - Plus Connection 3 (30a) (in instrument panel wiring harness)

1) - Through June 2007

2) - From July 2007

Previous Diagram 652/2 (Tracks 1-14)

Next Diagram 652/4 (Tracks 29-42)