Headlamps Assembly Overview From 07.05

Headlamps Assembly Overview From 07.05

CAUTION:
Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch off all electrical consumers.
- Switch off ignition and remove ignition key.
- Disconnect negative (-) battery terminal.
- When disconnecting and reconnecting battery terminals, observe all applicable Notes and torque specifications, as well as instructions on performing OBD program and electrical system function checks.

NOTE: After performing any repairs or service that could affect headlamp aim, check/adjust aim.







1 - Cover
2 - Low beam headlamp bulb M29 / M31
- Bulb H7 12 V, 55 Watt
3 - Projector / reflector
4 - Screw
5 - High beam headlamp bulb M30 / M32
- Bulb H7U 12 V, 55 Watt
6 - Parking lamp bulb M43 / M44
- Bulb 12 V, 5W
7 - Headlamp housing
8 - Not applicable to US/CDN models
9 - Screw