Remote Fuel Filler Door Release Switch and Remote Rear Lid Release Switch

Interior Lamps and Switches

• When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic sedge, screwdriver) will be positioned using commercially available adhesive tape.

Remote Fuel Filler Door Release Switch and Remote Rear Lid Release Switch

The Remote Fuel Filler Door Release Switch (E204 ) and the Remote Rear Lid Release Switch (E188 ) inside the driver door are a single unit and cannot be replaced separately. The entire switch unit must be replaced.

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Remove the door trim panel on the driver side.

- Disconnect the connector on the switch.

- Press the tabs - arrows - and remove the switch housing - 1 - from the door trim panel.





Installing

Install in reverse order of removal.