Airbag OBD, Initiating Program
Airbag OBD, Initiating Program
- Connecting VAG1551 or VAS5051.
- Switch on ignition.
- Switch on printer with Print button (warning lamp in button lights up) if using VAG1551 or print via the print menu when using VAS5051, if necessary.
Indicated on display:
Rapid data transfer HELP
Enter address word XX
- Press buttons 1 and 5 (the address word of the vehicle system to be tested "Airbag" is entered with 15).
Indicated on display:
Rapid data transfer Q
15 Airbag
- Confirm entry with Q button.
Indicated on display:
Rapid data transfer HELP
Select function XX
NOTE:
- If one of the malfunction messages opposite appears in the display, the possible causes of the malfunction can be printed out with the HELP button.
Rapid data transfer HELP
Control module does not answer
- When doing this the ignition must be switched on.
Rapid data transfer HELP
K wire not switching to positive.
- Malfunctions have occurred at the start of or during the program (external interference?).
Rapid data transfer arrowright
No signal from control module.
- Check diagnosis wires as well as voltage supply and ground (GND) connection.
Rapid data transfer arrowright
Fault in communication build up
- After repairing the possible causes of the malfunction, once again enter the address word 15 for "Airbag" and confirm with the Q button.
Indicated on display after entering the address word 15:
Rapid data transfer
Tester sends address word 15
and the following is indicated on display:
Indicated on display of scan tool VAG1551 (Refer to ETKA for actual control module version):
6Q0909605E 04 AIRBAG VW7 0518 arrowright
Coding 0012340 WSC12345
- arrowright Press button
Indicated on display:
Rapid data transfer HELP
Select function XX
Selectable Functions
NOTE:
- A list of possible functions is printed out after pressing the HELP button.
- Do not select further functions, which can be printed out after pressing the HELP button.
- After the functions have been completed the VAG1551 returns to the following start position:
Indicated on display:
Rapid data transfer HELP
Select function XX
Control Module, Checking Version
- Connecting VAG1551 or VAS5051 - Scan Tool, Connecting and initiating On Board Diagnosis (OBD) - Airbag OBD, Initiating Program.
- Switch on printer with Print button (warning lamp in button lights up) if using VAG1551 or print via the print menu when using VAS5051, if necessary.
- Press buttons 0 and 1.
Indicated on display:
Rapid data transfer Q
01 - Interrogating control module version
- Confirm entry with Q button.
Control Module VW3
Indicated on display of scan tool VAG1551 (Refer to ETKA for actual control module version):
1J0 909 609 D AIRBAG VW 3 SG 0001 arrowright
Coding 00068 WSC12345
Top line
- Part number of control module
- System-designation
- (AIRBAG VW3 SG V03)
- S-Side airbag, G- electrical.
- belt tensioner, 0001-Version number
Lower line
- Code number
- Dealership code number x-gusnqtxcpj
Will be automatically stored in the control module when entering the system.
Control Module VW5
Indicated on display of scan tool VAG1551 (Refer to ETKA for actual control module version):
6Q0909605 A 0F AIRBAG VW5 01 0004 arrowright
Coding 12358 WSC12345
Top line
- Part number of control module
- (6Q0909605 A)
- Index (0F)
- System designation
- (AIRBAG VW5)
- Version number crash sensor
- (01)
- Version number software
- (0004)
Lower line
- Code number
- Dealership code number x-gusnqtfdpj
Will be automatically stored in the control module when entering the system.
Control Module VW7
Indicated on display of scan tool VAG1551 (Refer to ETKA for actual control module version):
6Q0909605E 04 AIRBAG VW7 0518 arrowright
Coding 0012340 WSC12345
Top line
- Part number of control module
- (6Q0909605E)
- Index (04)
- System designation
- (AIRBAG VW7)
- Version number software
- (0518)
Lower line
- Code number
- Dealership code number x-husnqtxdpj
Will be automatically stored in the control module when entering the system.
- arrowright Press button
Indicated on display:
Rapid data transfer HELP
Enter address word XX