Controls, Housing

Special Tools

Special tools, testers and auxiliary items required

• Hook (Matra V/170)

• Connecting pin (T10027)





• Hose clamp pliers (V.A.G 1275)





• - 1 - Two arm puller (Kukko 20/10 )









Special tools, testers and auxiliary items required

• Support channels (VW 457)

• Engine support bridge (10 - 222 A)

• Adapter (10 - 222 A /3)

• Adapter (10 - 222 A /8)

• Shackle (10 - 222 A /12)

• Transmission support (3282)





Special tools, testers and auxiliary items required

• Adjustment plate (3282/39)

• Engine support device (3300 A)

• Transmission support jig (3336)

• Engine/transmission jack (V.A.G 1383 A)

• Torque wrench 5 to 50 Nm (V.A.G 1331)

• Torque wrench 40 to 200 Nm (V.A.G 1332)

• Tensioning strap (T10038)





Special tools, testers and auxiliary items required

• Driving sleeve (VW 244 B)

• Needle bearing drift (VW 295)

• Holding plate (VW 309)

• Transmission support (VW 353)

• Tube 37 mm dia. (VW 416 B)

• Bracket (30 - 211 A)





Special tools, testers and auxiliary items required

• Driving sleeve (32 - 111)

• Torque wrench 5 to 50 Nm (V.A.G 1331)

• Torque wrench 40 to 200 Nm (V.A.G 1332)

• Heat gun (V.A.G 1416)

• Drip tray for shop crane (VAS 6208)

• Thrust piece (T10030/4)





Special tools, testers and auxiliary items required

• Needle bearing drift (VW 295)

• Needle bearing drift (VW 295 A)

• Thrust pad (VW 447 H)

• Thrust pad (VW 512)

• Thrust tube (VW 454)

• Tube (2040)





Special tools, testers and auxiliary items required

• Slide hammer-complete set (VW 771)

• Additional part for VW 771 (VW 771/37)

• Seal installer set - rear diff (3066)

• Thrust pad (3124)

• Thrust piece (T10148)





Special tools, testers and auxiliary items required

• Sleeve (VW 423)

• Torque wrench 5 to 50 Nm (V.A.G 1331)

• Thrust piece (T10203)





Special tools, testers and auxiliary items required

• Thrust plate (VW 402)

• Thrust piece (3290/1)

• Thrust pad 16.5/28 MM dia. (VW 431)

• Assembly tool (3301)

• Spacer sleeve (VW 472/2)

• Drift (10 - 206)





Special tools, testers and auxiliary items required

• Assembly mandrel (10 - 508)

• Pry lever - rmv outside mirror (80 - 200)

• Spring strut compressor (2070)