Operation CHARM: Car repair manuals for everyone.

Central Locking System and Comfort System Assembly Overview






Central Locking System and Comfort System Assembly Overview





1 Coupling Station

Component location: Lower A-pillar, covered by footwell trim.

- Remove lower A-pillar trim.

2 Alarm Signal Horn

Component location: On right, behind plenum chamber sealing cover

Removing:

- Remove plenum chamber sealing cover. Refer to => [ Plenum Chamber Cover ] Service and Repair

3 Right Front Window Regulator Switch

Only for comfort system

4 Remote Control Antenna

Under A-pillar trim

5 Front Passenger Interior Locking Button

6 Right Front Door Control Module

Only for comfort system

Integrated in window regulator motor

Removing:

- Remove door trim.

- Remove window regulator motor.

7 Right Front Door Lock

Door lock is secured to subframe

Electrical central locking system is integrated in door lock module

Removing:

- Remove door trim.

- Remove door lock. Refer to => [ Door Lock ] Removal and Replacement, convertible => [ Door Lock, Convertible ] Removal and Replacement.

8 Fuel Tank Lid Unlock Motor (V155)

Component location: under C-pillar trim

Removing, refer to => [ Tank Lid Release Motor ] Service and Repair

9 Exterior Mirror Adjustment Switch and Selector Switch

10 Driver Interior Locking Button

11 Rear Lid Remote Release Motor

Bolted to carrier

Micro switch for lock cylinder is also located on carrier

Rear Lid Remote Release Motor (V151) can only be removed in conjunction with carrier

Removing and installing, refer to => [ Rear Lid Remote Release Motor Carrier ] Rear Lid

12 Coupling Station

Component location: In area of left-hand side of luggage compartment

Not on Convertible

13 Hood Lock

Bolted onto lid

Removing:

- Remove rear lid trim.

- Remove lid lock, refer to => [ Rear Lid Lock, Convertible ] Rear Lid, convertible => [ Rear Lid Lock, Convertible ] Rear Lid.

14 Left Front Door Lock

Door lock is secured to subframe

Electrical central locking system is integrated in door lock module

Removing:

- Remove door trim.

- Remove door lock, refer to=> [ Door Lock ] Removal and Replacement, convertible => [ Door Lock, Convertible ] Removal and Replacement.

15 Left Front Door Control Module

Only for comfort system

Integrated in window regulator motor

Removing:

- Remove door trim.

- Remove window regulator motor.

16 Operating Unit

With switch for fuel flap release/rear lid release

Installed in door trim

Removing:

- Remove door trim.

17 Coupling Station

Component location: Lower A-pillar, covered by footwell trim.

- Remove lower A-pillar trim.

18 Window Regulator Switch

Only for comfort system

19 Central Control Module

Bolted on under instrument cluster with bracket at steering column

To remove, trim under steering column must be removed beforehand.

20 Hood Lock

Contact switch for ATWS

Component location: in lock carrier

Removing lid lock. Refer to => [ Hood Lock ] Hood