Left Backrest Cover and Cushion

Rear Cover and Cushion

Left Backrest Cover and Cushion

Removal

- Remove headrests.

- Press down backrest cushion below guide - 2 - and disengage retaining tab using screwdriver or drift - 1 -.





- Remove headrest guide - 2 -.

- Remove clamping strip - 2 - from rear panel and fold out rear part - 1 - of cover.





- Remove left pivot pins - 1 -.





- Remove cover piping all around from backrest.

- Pull cover and cushion off backrest and release locking mechanisms - arrows - of button - 1 -.





- Remove button - 1 -.

• Cover is reinforced in area of button and therefore cannot be pushed over installed button.

- Remove the cover -=> [ (Item 1) Cover ] Rear Cover and Cushion (Overviews)- and cushion -=> [ (Item 7) Cushion ] Rear Cover and Cushion (Overviews)- from the rear panel -=> [ (Item 5) Rear Bulkhead ] Rear Cover and Cushion (Overviews)-.





- Cut the upholstery clips -=> [ (Item 8) Cushion Clamp ] Rear Cover and Cushion (Overviews)-.

- Remove the cover -=> [ (Item 1) Cover ] Rear Cover and Cushion (Overviews)- from the cushion -=> [ (Item 7) Cushion ] Rear Cover and Cushion (Overviews)-.

Installation

To install, perform the steps used in removal in reverse order.

Use new cushion clamps when reinstalling.