Diagram 639/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Windshield Wiper/Washer Switch, Wiper/ Washer Intermittent Relay, on relay panel, Windshield Wiper Motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E22 - Windshield Wiper/Washer Switch

J31 - Wiper/Washer Intermittent Relay, on relay panel

J220 - Engine Control Module (ECM) Locations

S224 - Fuse 24 in fuse holder

S227 - Fuse 27 in fuse holder

T5m - 5-Pin Connector, on windshield wiper motor

T8c - 8-Pin Connector

T18a - 18-Pin Connector

T121 - 121-Pin Connector, at -J220-

V - Windshield Wiper Motor

(119) - Ground connection -1-, in headlight wiring harness

(120) - Ground connection -2-, in headlight wiring harness

(503) - Threaded connection -2- (75x) on the relay plate

(642) - Ground Connection (on electronic fan control)

(A27) - Wire Connection (vehicle speed signal), in instrument panel wiring harness

(A96) - Connector (53a), in instrument panel wiring harness

(A97) - Connector (53), in instrument panel wiring harness

(A102) - Connector (windshield wiper), in instrument panel wiring harness

Previous Diagram 639/2 (Tracks 1-14)

Next Diagram 639/4 (Tracks 29-42)