Driver Outside Door Handle

Access/Start Authorization Antennas and Sensors

Driver Outside Door Handle

The following components are integrated in driver's side outside door handle:

• Driver Outside Door Handle Touch Sensor (G415)

• Left Access/Start Authorization Antenna (R134)

• The complete outer door handle must always be replaced if malfunctioning.

• No coding, basic setting or adaptation is necessary when outside door handle is replaced. Erase the DTC memory in "Guided Fault Finding" with the Vehicle Diagnosis, Testing and Information System (VAS5051B). Refer to => [ Driver Access/Start Authorization Antenna, Checking ] Antennae and Sensors For Access/Start Authorization, Checking or => [ Driver Outside Door Handle Touch Sensor, Checking ] Antennae and Sensors For Access/Start Authorization, Checking.

Removing:

- Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

- Remove left front outside door handle.

Installing:

Install in reverse order of removal.