Parking Aid and Parallel Parking Assistance Control Module (J446), From 05.08

Parking Aids

Parking Aid and Parallel Parking Assistance Control Module (J446), From 05.08

Parking Aid Control Module is located behind side panel trim in luggage compartment, right side.

Removing:

- Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

- Open cover of right side wall trim in luggage compartment.

• For clearer illustration, component location of Parking Aid Control Module is depicted with the side trim panel removed.

- Disengage and disconnect harness connectors - 2 -.





- On both sides of Parking Aid Control Module depress locking tabs - arrows - and pull Parking Aid Control Module - 1 - out of retainers.

Installing:

Install in reverse order of removal.