Rear Parking Aid Sensors

Parking Aids

Rear Parking Aid Sensors

Removing:

- Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

- Remove rear bumper cover.

Removal of the rear parking aid sensors is performed in the same way as for the front parking aid sensors, refer to => [ Front Parking Aid Sensors ]. Front Parking Aid Sensors

Installing:

Install in reverse order of removal, noting the following:

• When inserting sensor into sensor bracket, make sure that de-coupling ring (black silicone ring) has proper fit on the sensor head.

• Both sensor bracket retaining clips must engage audibly when installing sensor.