Platform - Strengthened Body Plate

Platform

Front platform
The following areas are manufactured from higher-strength body plates







1 - Inner sill panel
2 - Front floor cross member with left and right connecting plate
3 - Reinforcement for center tunnel with front carrier piece at floor
4 - Diverse front platform parts (e.g. cover plate longitudinal member, partition plate longitudinal member, towing eye mount with mounting bracket etc.)

NOTE: The front longitudinal member and floor panel - 5 - are only shown to provide orientation.

Rear platform
The following areas are manufactured from higher-strength body plates







1 - Rear partition plate longitudinal member, cover plate longitudinal member
2 - Rear longitudinal member with connecting plates
3 - Suspension strut mounting
4 - Floor cross member with connecting plates
5 - Cross member for spare wheel well with connecting plates