Insulation

Hood

Insulation

Removing





- Support the hood - 4 -.

- Remove the gas-filled strut - 3 - from the hood - 4 -. Refer to=> [ Gas Strut ] Gas Strut

- Pry the clips - 1 - out of the insulation - 2 -. Use pry lever (80-200),

- Pull insulation - 2 - out of longitudinal holes.

Installation





• Make sure the clamps - 1 - are installed with the wide side facing out when installing the insulation - 2 -.

- Slide insulation - 2 - with mounting tabs into longitudinal holes.

- Engage all clips - 1 - in insulation - 1 -.

- Press gas-filled strut - 3 - onto ball studs on the hood - 4 -.