Rear Lid Trim

Rear Lid Trim

Rear Lid Trim

Removal

- Remove warning triangle bracket. Refer to => [ Warning Triangle Bracket ] Warning Triangle Bracket

- Remove 4 screws - 1 - in grip recesses (1.5 Nm).

• In addition to the four screws, the trim is secured all around to rear lid with ten metal clips - arrows -.

- Pull trim up slightly and press metal clips - arrows - all around with a screwdriver out of mounts in rear lid.

- Disengage rear lid emergency release from rear lid lock.





Installation

- To install, perform the steps used for removal in reverse order.

• Before installing, check metal clips for damage and replace if necessary.