License Plate Holder

License Plate Holder

Removing







- Remove clips - 2 - and remove license plate holder - 1 - from radiator grille - 3 -.







Installing

With holes present







- Place license plate holder - 1 - on radiator grille - 3 - and press in clips - 2 -.

With no holes present

NOTE:
- On vehicles with front parking assist, - depth dimension a - of 12 mm must be maintained when boring holes.
- The parking assist wiring harness - 3 - is routed at the height of the upper bore hole on the bumper carrier - 5 -.

- Center license plate holder - 1 - to radiator grille - 3 -.
- Set drill machine depth stop to - dimension a - of 12 mm and drill holes.
- Place license plate holder - 1 - on radiator grille - 3 - and press in clips - 2 -.