Decorative Strip Assembly Overview

Moldings and Trim

Decorative Strip Assembly Overview





1 Decorative Trim Strip

• Clipped and glued

• Removing:

- Lightly warm trim molding with hot air gun (V.A.G 1416) and remove from grommets and adhesive tape.

• installing:

- Adhesive surfaces must be cleaned with adhesive remove D 002 000 10 before assembling trim molding.

- Remove any adhesive residue with adhesive remover (VAS 6349).

- Center trim molding in grommets and push down forcefully.

2 Grommet

• Quantity: 4

3 Mounting Hole

4 Rear Lid