C-Pillar Trim, Wagon

Pillar Trim

C-Pillar Trim

Removal

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

- Remove airbag emblem - 1 - and remove screw - 2 - (2 Nm).

• When re-installing, airbag emblem - 1 - must be replaced.

- Remove trim on right side from door seal piping.

- Pull trim toward rear out of clips in C-pillar - arrow A -.

- Pull trim with clip - 3 - inward out of mount in C-pillar - arrow B -.

• For the sake of illustration, clip - 3 - is depicted as removed in the illustration.





Installation

- To install, perform the steps used for removal in reverse order.