Driver Side Trim

Storage Compartments, Covers and Trim

Driver Side Trim

Removal

- Remove left side instrument panel cover. Refer to => [ Instrument Panel Side Covers ] Instrument Panel Side Covers

- Remove Infotainment trim. Refer to => [ Infotainment Trim ] Infotainment Trim

- Remove instrument panel center trim. Refer to => [ Center Instrument Panel Trim ] Center Instrument Panel Trim

- Remove instrument cluster trim. Refer to => [ Instrument Cluster Trim ] Instrument Cluster Trim

- Remove two side screws - 1 - (1.5 Nm).

- Press rotary light switch in as far as stop, rotate it toward right until it stands vertically, now pull it out and disconnect wiring harness.

- Remove bolt - 2 - (1.5 Nm).

- Remove the two bolts - 3 - (1.5 Nm).

- Remove the two bolts - 4 - (1.5 Nm).

- Loosen trim from instrument panel.

- Disconnect wiring harnesses from automatic headlamp range control and parking brake switch.

- Disconnect wiring harness from ignition lock.





Installation

- To install, perform the steps used for removal in reverse order.