Lock Cylinder Housing Cover Cap

Door Components

Lock Cylinder Housing Cover Cap

Removing

• When removing cover cap of lock cylinder housing, emergency key must not be turned and do not use prying motions with emergency key.

- Remove emergency key from remote control key.





- Press emergency key - 3 - lightly - arrow a - into hole on underside of cover cap for lock cylinder housing.

- Pull off cover cap for lock cylinder - 1 -, together with emergency key, lightly at underside from door - arrow b -.

- Slide cover cap upward - arrow c - from lock cylinder housing.

Installation

- Place cover cap for lock cylinder housing - 2 - lightly at an angle from above - arrow a - on to lock cylinder housing.





- Press cover cap of lock cylinder housing - 2 - on to door - arrow b - until cover cap engages with lock cylinder housing.