Mirror Glass

Exterior Rearview Mirror

Mirror Glass

• The following describes removing and installing the left mirror glass only. Removing and installing the right mirror glass is identical.

CAUTION!
Wear protective eyewear and gloves when working.

Removing

- Protect housing edge - 1 - from paint damage, for example, cover using fabric-reinforced adhesive tape.





- Press the bottom of the mirror glass - 2 - into the mirror housing - 1 -.

- Press off mirror glass - 2 - using (80-200) from bracket - 5 - and housing - 1 - - arrow 6 -.

- Swivel mirror glass - 2 - to the side - arrow 4 - and disconnect the installed connector terminals - 3 - for electric dimming function and mirror heater from rear side of mirror glass - 2 -.

Installation

- Insert connector terminals for mirror heater to mirror glass.

- Press mirror glass at center onto holder in housing.

- The mirror glass will engage with a click.

• Then perform a function test.