Mirror Housing

Exterior Rearview Mirror

Mirror Housing

• The following describes removing and installing the left mirror housing. Removing and installing the right mirror housing is identical.

Removing

- Remove mirror glass.





- Fold the exterior rearview mirror forward for easier installation.

Inner retaining hook - 2 - is not to be reached from front.

- Slide (3409) between mirror housing and turn signal. This disengages the retaining hooks - 2 -.

- Pull mirror housing at the front slightly off the mirror base plate.

- Then, remove the mirror housing - 1 - from the mirror base plate.

Installation

- Position the mirror housing - 1 - on the mirror base plate and press down until the catches - 2 - engage audibly.





- Re-install mirror glass.

• Then perform a function test.