Sunroof With Solar Panel, Webasto (Overview)

Sunroof with Solar Panel, Webasto


Function

All sunroof functions are available when the ignition is switched on.

After the ignition is switched off, these functions are available until the driver or passenger door is opened.

The opening of the solar panel of the sunroof can be preselected using rotary knob. The panel trim is permanently attached to the solar panel and cannot be moved separately.





The sunroof is equipped with a closing force limiter in area of window. When an obstruction is met during the closing sequence, the roof opens again by itself.

There is also an emergency closing function. If there are problems closing, the sunroof can be closed manually by pressing the preselector, which must be in the "sunroof closed" position.

During emergency closing, pinch protection has increased pinch force.

The sunroof drive motor is protected against overheating by a running time limiter. The locking mechanism activates after an uninterrupted operation of approximately. two minutes. Operation can only be resumed after a cool-down period.

If there is a malfunction in the electrical system, the sunroof motor can be moved using a hex wrench.

The integrated photoelectric cells - 1 - in the solar panel of the sunroof generate voltage in sunlight. This voltage is transferred to the vehicle blower via the terminals - 2 -. This functions only when the ignition is switched off and the solar panel is tilted or closed.