Link

Sliding/Tilting Sunroof with Glass Panel, Meritor


Link

• Always replace guides with cable as a pair.

Removing

- Sunroof glass panel, removing, refer to => [ Sunroof Glass Panel ] Sunroof Glass Panel

- Removing installation unit, refer to => [ Assembly Unit ]. Assembly Unit

- Remove drive motor for sunroof glass panel, refer to => [ Sunroof Glass Panel Drive ]. Sunroof Glass Panel Drive

- Remove slotted guide rail.

- Using a screwdriver, carefully disengage rain channel - 1 - in - direction of arrow - on both sides at bearing on guide retaining tabs - 2 - and remove rain channel.





- Disengage clip mechanism - arrows - of upper end piece - 1 - from lower end piece - 2 - using a screw driver and pull upper end piece off.





- Slide lower part of rear guide - 1 - in - direction of arrow - in guide rail - 3 - until the lock mechanism of guide catch - 2 - is released.





- Pull lower part of rear guide - 1 - and guide catch - 2 - together in - direction of arrow - out of guide rail - 3 -.

Installation

To install, perform the steps used for removal in reverse order.