Left Front Seat Backrest

Front Seats

Left Front Seat Backrest

Removal

- Mount the (VAS 6136) on the (VAS 6095).

- Remove front seat. Refer to => [ Front Seat ] Front Seat

- Attach the seat to the (VAS 6136).

- Remove the front seat belt latch. Refer to => [ Front Seat Belt Latches ] Service and Repair

- Remove seat cap. Refer to => [ Cover Cap ] Cover Cap

Electric seat

- Remove electric seat front end trim. Refer to => [ Power Seat Front Side Trim ] Power Seat Front Side Trim

- Remove electric seat trim. Refer to => [ Power Seat Trim ] Power Seat Trim

Partially electric seat

- Remove partially electric seat trim. Refer to => [ Partial Power Seat Trim ] Partial Power Seat Trim

Height-adjustable seat

- Remove height-adjustable seat trim. Refer to => [ Height-Adjustable Seat Trim ] Height-Adjustable Seat Trim

Fixed seat

- Remove trim of seat (without height adjuster). Refer to => [ Seat Trim without Height Adjustment ] Seat Trim Without Height Adjustment

Passenger Seat with Pass-Through

- Remove the front seat trim. Refer to => [ Passenger Seat Trim with Pass-Through ]. Passenger Seat Trim With Pass-Through

• The illustration shows a manual/partially electric seat. Removal and installation of electric seat is the same.

- Depending on vehicle equipment, loosen backrest wiring harnesses from seat frame.

- Connect (VAS 6229) onto wiring harness for side airbag.

- Remove two screws - 1 - and - 2 - on left and right.

- Using a screwdriver, bend backrest in area of threaded connections outward slightly and loosen backrest from seat frame.





Installation

- To install, perform the steps used for removal in reverse order.

Tightening specification for screws - 1 - and - 2 - is:

• Manual or partially electric seat: 34.5 Nm.

• Power seat: 27 Nm.