Partial Power Seat Trim

Front Seats

Partial Power Seat Trim

Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removal

- Pull handle - 2 - upward.

- Press securing clip metal tab - 1 - inward using a small screwdriver and remove handle - 2 - from adjustment lever - 3 -.

• For the sake of illustration, securing clip is depicted as removed in the illustration.

- Remove the securing clip - 1 - from the adjusting lever - 3 -.

- Compress clamping pin - 4 - inward and remove expanding clip - 5 -.

- Remove bolt - 6 - (3.5 Nm).

- Loosen trim - 7 - from seat frame and disconnect wiring harnesses on inner side of trim from switches.





Installation

- To install, perform the steps used for removal in reverse order.