Power Seat Angle Adjustment Unit

Front Seats

Power Seat Angle Adjustment Unit

Removal and installation of seat inclination adjuster is described for left backrest frame. Removal and installation of the right seat inclination adjuster is performed in the same way.

Removal

- Mount the (VAS 6136) on the (VAS 6095).

- Remove front seat. Refer to => [ Front Seat ] Front Seat

- Attach the seat to the (VAS 6136).

- Remove the front seat belt latch. Refer to => [ Front Seat Belt Latches ] Service and Repair

- Remove seat cap. Refer to => [ Cover Cap ] Cover Cap

- Remove electric seat front end trim. Refer to => [ Power Seat Front Side Trim ] Power Seat Front Side Trim

- Remove electric seat trim. Refer to => [ Power Seat Trim ] Power Seat Trim

- Remove electric seat trim bracket. Refer to => [ Power Seat Trim Bracket ] Power Seat Trim Bracket

- Remove front seat backrest. Refer to => [ Left Front Seat Backrest ] Left Front Seat Backrest

- Remove cover and upholstery from front seat backrests. Refer to => [ Front Seat Cushion ] Front Seat Cover and Upholstery

- Disconnect wiring harness - 1 - from inclination adjuster - 2 -.

- Remove the bolt - 3 -.

- Remove the two sets of bolts - 4 - and - 5 -.

- Remove inclination adjustment - 2 - from seat frame.





Installation

- To install, perform the steps used for removal in reverse order.