Power Seat Trim

Front Seats

Power Seat Trim

Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removal

- Remove electric seat front end trim. Refer to => [ Power Seat Front Side Trim ] Power Seat Front Side Trim

- Compress the clamping pin - 1 - inward and remove expanding clip - 2 -.





- Remove bolt - 1 - (3.5 Nm).

- Loosen trim - 2 - from seat frame and disconnect wiring harnesses on inner side of trim from switches.

- Remove screw - 3 - (3.5 Nm) and remove trim - 4 - from seat frame.





Installation

- To install, perform the steps used for removal in reverse order.