Seat Bench

Rear Seats

Seat Bench

Removal

- In vehicles with heated rear seats, switch ignition off.

Vehicles with integrated child seat

- Swing integrated child seat - 1 - upward.





- Pull the foot compartment - 2 - out of mounts in bench seat.

- For vehicles with one integrated child seat, remove two bolts - 1 - (8 Nm).

- For vehicles with two integrated child seats, remove two bolts - 2 - and - 3 - (8 Nm) respectively.





All vehicles

• To provide a better overview, rear seat backrest is not depicted in the illustration.

- Pull the front of the bench seat - 1 - up and out of the two mounts - 2 - - arrows A -.

- Push the bench seat toward rear - arrow B -.

- Pull the back of the bench seat up and out of side guide plates - 3 -.

- On vehicles with heated rear seats, disconnect seat heating wiring harness.

- Remove the bench seat from vehicle.





Installation

- Installation of bench seat - 1 - is the same as removal, but in reverse order.

• Before installation, check both mounts - 2 - fro damage and replace if necessary.