Diagram 150/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Steering angle sensor, Vehicle electrical system control module, Steering column electronics control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake lamp switch Locations [1][2]Brake Light Switch

F4 - Back-up lamp switch Locations

G85 - Steering angle sensor Anti-lock Brake System w/ EDL/ASR/ESP [1][2]Diagrams

J519 - Vehicle electrical system control module Control Modules in Interior

J527 - Steering column electronics control module Control Modules in Interior [1][2]Connector Views

J533 - Data bus on board diagnostic interface, in the left footwell, near the center console Control Modules in Interior

T2bj - Double connector

T4f - 4-pin connector

T8t - 8-pin connector

T12i - 12-pin connector

T12m - 12-pin connector

T16d - 16-pin connector

T16g - 16-pin connector

T20d - 20-pin connector

T20e - 20-pin connector

(B335) - Connection 1 (54) (in main wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B384) - Powertrain CAN bus high connection 2 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B391) - Powertrain CAN bus low connection 2 (in main wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

* - Diagnostic connector

*2 - From November 2008

*3 - Through October 2008

Previous Diagram 150/5 (Tracks 43-56)

Next Diagram 150/7 (Tracks 71-84)