Diagram 14/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Memory Seat/Steering Column Adjustment Control Module, Data Bus On Board Diagnostic Interface, Data Link Connector (DLC)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G423 - Massaging lumbar support height sensor

G440 - Backrest adjustment sensor Locations

J136 - Memory Seat/Steering Column Adjustment Control Module Control Modules in Interior

J533 - Data Bus On Board Diagnostic Interface Control Modules in Interior

T2gb - Double Connector, black, in seat

T3cp - 3-Pin Connector, black, in seat

T4br - 4-Pin Connector, black

T4bx - 4-Pin Connector, black

T4nk - 4-Pin Connector, black, in seat

T4nl - 4-Pin Connector, black, in seat

T6bp - 6-Pin Connector, blue

T6bq - 6-Pin Connector, white

T8ae - 8-Pin Connector, black, in seat

T10c - 10-Pin Connector, black, connector station driver's side, below seat

T16d - 16-Pin Connector, Data Link Connector (DLC)

T20e - 20-pin connector

V286 - Backrest adjustment motor Locations

V328 - Lumbar massage pump

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

(M96) - Connection 4 (in seat adjustment wiring harness)

* - Only seats with massage, applicable through April 2005

** - Only seats with massage, applicable from May 2005 through April 2006

*** - Only seats with massage, applicable from May 2006

Previous Diagram 14/5 (Tracks 43-56)

Next Diagram 14/7 (Tracks 71-84)