Diagram 183/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Memory Seat/Steering Column Adjustment Control Module, Lumbar Support Height Adjustment Motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G423 - Massaging lumbar support height sensor

J136 - Memory Seat/Steering Column Adjustment Control Module Control Modules in Interior

J533 - Data Bus On Board Diagnostic Interface Control Modules in Interior

T2ga - Double Connector, black, in seat

T2gb - Double Connector, black, in seat

T3cp - 3-Pin Connector, black, in seat

T4br - 4-Pin Connector, black

T4bx - 4-Pin Connector, black

T6bp - 6-Pin Connector, blue

T6bq - 6-Pin Connector, white

T10c - 10-Pin Connector, black, connector station driver's side, below seat

T20e - 20-pin connector

V229 - Lumbar support height adjustment motor

V230 - Lumbar support forward/back adjustment motor

V286 - Backrest adjustment motor Locations

V328 - Lumbar massage pump

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

* - Only seats with massage

** - Only seats without massage

Previous Diagram 183/4 (Tracks 29-42)

Next Diagram 183/6 (Tracks 57-70)