Radiator Cooling Fan: Service and Repair

Fan Shroud and Fans

Removing

- Remove the upper bolts for the fan shroud - upper arrows -. Loosen the refrigerant pipes and move them to the side if necessary.





- Remove the noise insulation.

- Disconnect the harness connector - 1 - and remove the lower bolts for the fan shroud - lower arrows -.





- Remove the fan shroud downward.

- Disconnect the electrical connector - 1 - and lay the wire free, if necessary.





- Remove the nuts - arrows - and remove the coolant fans, if necessary.

Installing

Installation is performed in the reverse order of removal, noting the following:

Tightening specifications, refer to => [ Cooling System Components Overview, Body Side ] Cooling System Components Overview, Body Side.