Drive Belt: Locations

Ribbed Belt and Accessory Drive Component Overview





1. Accessory bracket
^ Observe tightening sequence
2. 23 Nm
3. 23 Nm
4. Generator
^ To facilitate installing the generator, slightly drive back threaded bushings for retaining bolts on generator.
5. 45 Nm
^ Observe tightening sequence.
^ Insert with locking fluid.
6. Bushing
^ 2 pieces
7. 25 Nm
8. A/C compressor
9. Ribbed belt
^ Before removing, mark direction of rotation using chalk or felt-tip marker
^ Check for wear
^ Do not kink
10. Pulley
^ For ribbed belt
11. Bolt
^ Replace
^ Strength category 8.8: 10 Nm + 90 degree (1/4 turn) additional turn
^ Strength category 10.9: 20 Nm + 90 degree (1/4 turn) additional turn
12. 23 Nm
13. Tensioner
^ To release tension on ribbed belt, swing using open-end wrench.





Accessory Assembly Bracket Tightening Sequence