Oil Pan: Locations

Oil Pan Assembly Overview





1. 15 Nm
2. Oil dipstick
^ Oil level must not be above the max. mark!
3. Inlet spout
4. Guide tube
5. Intermediate plate
6. Oil pump with balance shaft drive
^ With pressure relief valve 12 bar
7. 15 Nm + 1/4 turn (90 degree)
^ Replace
^ Note different length of bolts
8. 15 Nm
9. Oil pan
^ Clean sealing surface before installing
10. 15 Nm
11. Seal
12. Oil drain plug
^ 30 Nm
^ With permanent sealing ring
^ Replace
13. Chain sprocket
14. 10 Nm
^ Not for engine code BPY
15. Protective cap
^ Not for engine code BPY
16. Oil level thermal sensor G266
^ Not for engine code BPY
17. Seal
^ Not for engine code BPY
^ Replace
^ Oil before assembling
18. 20 Nm + 1/4 turn (90 degree)
^ Replace
19. Chain guard
20. Chain
21. Sealing flange
^ Must be located on dowel sleeves
^ To remove and install, remove oil pan.