Oil Pump: Locations

Oil Pump and Components Overview





1. Chain guard
2. Chain
^ Mark direction of travel (installation position) using color marking before removing
3. Fitting sleeves
4. Intermediate plate
5. Oil pump with balance shaft drive
^ Before installing, check to be sure both alignment bushings are present for centering
6. 9 Nm
7. Cover
^ Prevents engine oil from foaming up
8. 40 Nm
9. 8 Nm
10. Oil intake pipe
^ Clean strainer if soiled
11. O-ring
^ Replace
12. 15 Nm + 1/4 turn (90 degree)
^ Replace
^ Note different length of bolts
13. Outer rotor
^ Check contact surfaces for groove build up
^ Marking must be visible
14. Inner rotor
^ Check contact surfaces for groove build up
15. Oil pump cover
16. Chain sprocket
17. 20 Nm + 1/4 turn (90 degree)
^ Replace
18. Chain tensioner with tensioning rail
19. 15 Nm